CONTACT US
Hotline
86-021-54422402
Tel86-13818829143
Mailboxshmidon@126.com
AddressNo. 98 Songhai Road, Qingpu Industrial Zone, Shanghai
Product:
SWI universal joint: SWC-I universal joint, lightweight universal jointIt is a reduction plate of SWI cross universal joint SWC, with a minimum column size of 58. It is one of the main products of MaidongIndustry and is often supplied to customers inthe textile industry, printing and dyeing, clothing, and lifting equipment. Compared withthe same size and torque, it is also known as SWI or sSWC-I s···
- Product
-
SWI universal joint: SWC-I universal joint, lightweight universal joint
It is a reduction plate of SWI cross universal joint SWC, with a minimum column size of 58. It is one of the main products of Maidong
Industry and is often supplied to customers in the textile industry, printing and dyeing, clothing, and lifting equipment. Compared with
the same size and torque, it is also known as SWI or sSWC-I small cross universal joint. It is
a high-speed, sensitive, and lightweight universal joint transmission shaft that saves space and solves angular, axial, and radial
displacement and deviation. It is a cost-effective and preferred product, but it has low strength and is not recommended for use in equipment
with large torque, heavy load, or potential instantaneous heavy load impact.
Maidong Industrial Small Precision Light Universal Coupling Characteristics: It has flexible universal flexibility,
small body size, high torque force, high-speed and high-temperature resistant bearings, and long service life.
Main parameters and performance of Maidong Industrial SWI small universal joint:
型式 项目 SWI SWI SWI SWI SWI SWI SWI SWI SWI 58 65 75 90 100 120 150 180 200 225 A型 L 255 285 335 385 445 500 590 640 775 860 LV 35 40 40 45 55 80 80 80 100 120 m(kg) 2.2 3 5 6.6 9.5 17 32 40 76 128 B型 L 150 175 200 240 260 295 370 430 530 600 m(kg) 1.7 2.4 3.8 5.7 7.7 13.1 23 28 55 98 C型 L 128 156 180 208 220 252 340 348 440 480 m(kg) 1.3 1.95 3.1 5 7 12.3 22 30 56 96 Tn(N*m) 180 240 500 800 1200 2300 4500 8400 16000 22000 Tf(N*m) 90 120 250 400 600 1150 2250 4200 8000 11000 β(°) 35 35 35 35 35 35 35 25 25 25 D 52 63 72 92 100 112 142 154 187 204 Df 58 65 75 90 100 120 150 180 200 225 D1 47 52 62 74.5 84 101.5 130 155.5 170 196 D2(H9) 30 35 42 47 57 75 90 110 125 140 D3×δ 38×3 38×3 50×3.5 50×3.5 68×5 68×5 95×5.5 108×8 121×11 140×11 Lm 32 39 45 52 55 63 85 87 110 120 K 3.5 4.5 5.5 6 8 8 10 12 14 15 t 1.5 1.7 2 2.5 2.5 2.5 3 4 4 5 n 4 4 6 4 6 8 8 8 8 8 d 5.1 6.5 6.5 8.5 8.5 10.5 13 15 17 17 ML(kg) 0.26 0.26 0.4 0.4 0.78 0.78 1.21 1.97 2.98 3.5 法兰螺栓 规格 M5 M6 M6 M8 M8 M10 M12 M14 M16 M16 拧紧力矩 7 13 13 32 32 64 110 180 270 270 FSC A型 880 1200 1850 2310 3325 5100 7360 8800 15200 25600 FSC B型 792 1080 1665 2079 2992.5 4590 6624 7920 13680 23040 FSC C型 704 960 1295 1617 2327.5 3570 5152 6160 10640 17920 Note: 1. The meanings of each code in the above table are as follows
L - standard length, for the expandable type, the length is the minimum length in the shortened state;
Lv - elongation;
M - Quality;
Tn - nominal torque;
Tfl - Mass increased by 100mm.
2. If the measurement unit is not specified in the above table, it shall be measured in millimeters;
3. When users need to change the standard length, expansion amount, and flange type dimensions, please consult with our factory.
订货示范：SWI 58-L255+S20
