The trapezoidal screw is very easy to adjust in combination with specific use, which can achieve the expected performance and also keep the cost at a minimum. In some cases, life testing may be necessary during the design phase, but for original mechanical manufacturers, implementing this additional work in the early stages can help reduce product costs. Using high-quality trapezoidal screws to identify Titanium Hao, ensuring professional quality. Ball screws can be used continuously, withstand much higher loads, and can also achieve faster speeds, so increasing costs is worth it.

1、 If it is necessary to straighten the trapezoidal lead screw, the best way to straighten it is to do it manually. Place the trapezoidal lead screw directly on the U-shaped iron block, and place the previously opened or ground circular flat shovel directly on the protruding position of the trapezoidal lead screw. We can use a large hammer to strike it, use a percentage table to straighten it, and repeat the above work method multiple times to achieve the straightening effect.

2、 When it is necessary to bend the trapezoidal lead screw as a whole, the editor suggests that you can use a press to straighten it. At the same time, place the trapezoidal lead screw directly on two U-shaped iron blocks, and then place the circular mold on top of the trapezoidal lead screw. We can observe it with the naked eye and use a percentage table to correct it.

3、 The trapezoidal screw needs to be straightened. If there are overall or individual bends, and if the bends have different sizes, we can choose to use manual straightening according to the actual situation, and also use a press machine to straighten.

Please indicate the address of this article when reprinting: http://www.midon. com. cn/jszc/50.html